0 its.

/

0€

Zobacz koszyk Zobacz koszyk
Back to category
AirFiber 3X AF-3X Ubiquiti AirFiber 5 AF5 Ubiquiti

AirFiber 4X AF-4X Ubiquiti

Ubiquiti

product code: #AX12869

€296.44

AirFiber 4X AF-4X Ubiquiti

Carrier Backhaul Radio - features up to 17.1 Mbps/MHz and Hybrid Division Duplexing

Product description:

Overview

Ubiquiti Networks introduces the airFiber® AF-4X, Ubiquiti’s first licensed spectrum radio designed for the public safety sector. It meets the growing need of broadband capacity and optimizes use of the 4.9 GHz radio band with its industry-leading spectral efficiency and TDD throughput. The AF-4X allows you to customize airFiber backhaul links or upgrade existing Rocket® Point-to-Point (PtP) links.

 

Designed for the Public Safety Market

Deploy the high-performance and reliable AF-4X for municipal applications, including police, fire, and emergency medical services.

 

Engineered for Performance

Ubiquiti’s INVICTUS™ custom silicon and proprietary radio architecture are designed specifically for long-distance, outdoor wireless applications.

 

INVICTUS core communications processing engine surpasses all of the limitations inherent to generic Wi-Fi chips to provide superior performance, long-range capability, and higher delivered throughput.

 

The airFiber X features industry-leading spectral efficiency of up to 17.1 Mbps/MHz, line-rate data packet processing of up to 525 Mbps of real data throughput, and innovative xtreme Range Technology (xRT™) for up to 200+ km in range.

 

4 GHz Backhaul

Mission-Critical Communications

The AF-4X covers the 4.9 GHz spectrum for public safety. Additional frequencies, from 4.7GHz to 4.9 GHz, are supported in Europe and other regions (subject to local country regulations).

 

The AF-4X uses a proprietary radio communications protocol with AES-128 encryption to help ensure communication channels are secure.

 

Ultra-Low Latency with HDD Technology

The AF-4X is designed to provide the highest TDD throughput and lowest latency available using proprietary Hybrid Division Duplexing (HDD) technology.

 

Optimal Operation and Channel Configuration

The AF-4X supports up to 11 different channel width sizes* to suit your deployment needs. You can configure independent TX and RX channel frequencies and place them anywhere within the radio band, and the channel centers are selectable in 1 MHz increments. You also have the ability to program different uplink and downlink duty cycles to support asymmetric traffic requirements.

* Channel widths may vary according to country/region regulations.

 

Co-Location

With space at a premium, the importance of being able to co-locate equipment is becoming an essential attribute for modern wireless networks. The AF-4X is engineered to permit multiple radios to operate side by side, allowing maximum spectral efficiency.

 

GPS Synchronization

Precise GPS frame synchronization enables co-located AF-4X radios to transmit and receive data without interfering with each other, enabling better frequency reuse and increased network stability.

 

Clean Power Output

Using advanced digital signal processing, the innovative AF-4X radio design has an ultra-clean transmitter output, reducing broadband noise, facilitating co-location, and enabling higher-order modulations like 1024QAM for greater throughput.

 

Deployment Flexibility

The AF-4X supports ± 45° slant polarization for improved noise immunity and Signal-to-Noise Ratio (SNR). The compact form factor of the airFiber X allows it to fit into the radio mount of Ubiquiti antennas, so installation requires no special tools. The airFiber X antennas are purpose-built with 45° slant polarity for seamless integration with the airFiber AF-4X

 

 

Model

Frequency

Diameter Size

AF-5G30-S45

4 - 5 GHz

650 mm

AF-5G34-S45

4 - 5 GHz

1050 mm

 

You can also pair the AF-4X with one of the following RocketDish™ antennas by using a kit to convert the RocketDish to 45° slant polarity.

 

 

Model

Frequency

Diameter Size

RD-5G30

4 - 5 GHz

650 mm

RD-5G34

4 - 5 GHz

1050 mm

 

Conversion Kit The RocketDish to airFiber Antenna Conversion Kit converts the RocketDish RD-5G30 or RD-5G34 antenna to 45° slant polarity for use with the AF-4X.

 

 

Model

RD-5G30

RD-5G34

AF-5G-OMT-S45

X

X

 

 

AF-4X

Dimensions

224 x 82 x 48 mm (8.82 x 3.23 x 1.89")

Weight

0.35 kg (0.77 lb)

RF Connectors

(2) RP-SMA Weatherproof (CH0, CH1)

(1) SMA Weatherproof (GPS)

GPS Antenna

External, Magnetic Base

Power Supply

24V, 1A PoE Gigabit Adapter (Included)

Power Method

Passive Power over Ethernet Pins 1, 2, 4, 5 (+) and Pins 7, 8, 3, 6 (-)

Max. Power Consumption

12W

Supported Voltage Range

19-29VDC

Mounting

airFiber X Mount (Rocket Mount Compatible) GPS Pole Mount (Included)

Certifications

CE, FCC, IC

Operating Temperature

-40 to 55° C (-40 to 131° F)

AF-4X Networking Interface

Data Port

(1) 10/100/1000 Ethernet Port

Management Port

(1) 10/100 Ethernet Port

AF-4X System

Processor

INVICTUS IC

Maximum Throughput

500+ Mbps

Maximum Range

200+ km

Encryption

128-bit AES

OS

airOS® F

Wireless Modes

Master/Slave

AF-4X Radio

Frequency Range

FCC

IC

ETSI

Other Regions

 

 

 

4940 - 4990 MHz

4940 - 4990 MHz

4700 - 4990 MHz

4700 - 4990 MHz

Max. Conducted TX Power

29 dBm (Dependent on Regulatory Region)

Frequency Accuracy

± 2.5 ppm without GPS Synchronization

± 0.2 ppm with GPS Synchronization

Channel Bandwidth

 

AF-4X Suggested Max. TX Power

8x

21 - 22 dBm

6x

23 - 24 dBm

4x

25 - 26 dBm

2x

29 dBm

1x

29 dBm