0 its.

/

0€

Zobacz koszyk Zobacz koszyk
Back to category
wAP ac RBwAPG-5HacT2HnD MikroTik wAP RBwAP2nD MikroTik

wAP LTE kit RBwAPR-2nD&R11e-LTE MikroTik

MikroTik

product code: #AX12887

€75.11

wAP LTE kit RBwAPR-2nD&R11e-LTE MikroTik

Small weatherproof wireless access point with International LTE modem

Product description:

wAP LTE kit

The wAP LTE is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.

LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.

RBwAPR-2nD&R11e-LTE includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.

Product specifications

Details
Product code RBwAPR-2nD&R11e-LTE
10/100 Ethernet ports 1
2G Category Class12
3G Category R7 (21Mbps Downlinks, 5.76Mbps Uplink)
Antenna gain dBi for 2.4 GHz 2
CPU QCA9531
CPU core count 1
CPU nominal frequency 650 MHz
DC jack 9-30 V
Dimensions 185 x 85 x 30 mm
LTE Category 4 (150Mbps Downlink, 50Mbps Uplink)
LTE FDD bands 1 (2100MHz) / 2 (1900MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz)
LTE TDD bands 38 (2600MHz) / 40 (2300MHz)
License level 4
Max Power consumption 8W
MiniPCI-e slots 1
Number of DC inputs 1
Number of chains 2
Operating System RouterOS
PCB temperature monitor Yes
PoE in Passive PoE
Size of RAM 64 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -40°C .. +60°C tested
Voltage Monitor Yes
Wireless 2.4 GHz chip model QCA9531
Wireless 2.4 GHz standards 802.11b/g/n
Suggested price $119

Wireless specifications

2.4 GHz
Transmit power (dBm)Receive Sensitivity
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71

Included parts

Ethernet test results

RBwAPR-2nD&R11e-LTE QCA9531 100M one port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 8.1 98.4 23.5 96.3 173.6 88.9
Bridging 25 bridge filter rules 8.1 98.4 23.5 96.3 70.9 36.3
Routing none (fast path) 8.1 98.4 23.5 96.3 160.8 82.3
Routing 25 simple queues 8.1 98.4 23.5 96.3 90.8 46.5
Routing 25 ip filter rules 8.1 98.4 23.5 96.3 43.2 22.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results